PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A5764
A5764 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, body_width: 0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, bore_shape: STRAIGHT, body_height: 0.155 INCHES NOMINAL IN, body_length: 0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, bore_diameter: 35.00 MILLIMETERS NOMINAL MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-2074, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A5764
NSN: 3110-00-198-2074
FSC: 3110
CAGE: 46522 — DCM MANUFACTURING, INC. (USA)
SPECIFICATIONS
materialSTEEL INNER RING
body_width0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
body_height0.155 INCHES NOMINAL IN
body_length0.750 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
bore_diameter35.00 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
memory_capacityUNKNOWN
inner_ring_width0.9840 INCHES NOMINAL IN
outer_ring_width0.6690 INCHES NOMINAL IN
NSN3110-00-198-2074
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A5764 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OUTER RING
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
•
BORE SHAPE: STRAIGHT
•
SEAL QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
•
INNER RING WIDTH: 0.9840 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OUTER RING
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
SEAL QUANTITY2
RETAINER FABRICATION METHODPRESSED
INNER RING WIDTH0.9840 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.6690 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
103S95Interchangeable
interchangeable cross-reference
interchangeable
19282Interchangeable
interchangeable cross-reference
interchangeable
5306001450876Interchangeable
interchangeable cross-reference
interchangeable
MS35763-833Interchangeable
interchangeable cross-reference
interchangeable
MS35763-33Interchangeable
interchangeable cross-reference
interchangeable
HM1-7611-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A5764?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A5764?
A5764 is a BEARING,BALL,ANNULAR.
What parts can replace A5764?
There are 16 known substitutes for A5764: 103S95, 19282, 5306001450876 and 13 more. Substitute compatibility should be verified for your specific system.
Is A5764 still available?
A5764 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A5764

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026