PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS35763-833
MS35763-833 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.813 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, fastener_length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-145-0876, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS35763-833
NSN: 5305-00-145-0876
FSC: 5305
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_class2A A
thread_length0.813 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
fastener_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
locking_featureDISTORTIONS BEARING SURFACE OF HEAD
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
NSN5305-00-145-0876
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: MS35763-833 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
THREAD QUANTITY PER INCH: 16
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
LOCKING FEATURE: DISTORTIONS BEARING SURFACE OF HEAD
•
FEATURES PROVIDED: FINISHED HEAD
•
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
THREAD QUANTITY PER INCH16
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
LOCKING FEATUREDISTORTIONS BEARING SURFACE OF HEAD
FEATURES PROVIDEDFINISHED HEAD
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
88507LTInterchangeable
interchangeable cross-reference
interchangeable
88507CE1BT2Interchangeable
interchangeable cross-reference
interchangeable
192282Interchangeable
interchangeable cross-reference
interchangeable
20793052 FIND NO 14Interchangeable
interchangeable cross-reference
interchangeable
5306001450876Interchangeable
Same NIIN cross-reference
interchangeable
MS35763-33Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS35763-833?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS35763-833?
MS35763-833 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace MS35763-833?
There are 7 known substitutes for MS35763-833: 88507LT, 88507CE1BT2, 192282 and 4 more. Substitute compatibility should be verified for your specific system.
Is MS35763-833 still available?
MS35763-833 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS35763-833

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026