PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 19282
19282 ✓ Verified by PartsTable
Jumbo · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a Jumbo tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, feed_method: MAGAZINE, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 0.6250 INCHES NOMINAL IN, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0537, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
19282
NSN: 3110-00-100-0537
FSC: 3110
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
feed_methodMAGAZINE
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width0.6250 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.9840 INCHES NOMINAL IN
operation_methodMANUAL
outer_ring_width0.6690 INCHES NOMINAL IN
outside_diameter2.8125 INCHES NOMINAL IN
NSN3110-00-100-0537
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 19282 · Jumbo ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 2.8125 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER2.8125 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0625 INCHES NOMINAL IN
OVERALL WIDTH0.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
88507LTInterchangeable
interchangeable cross-reference
interchangeable
88507CE1BT2Interchangeable
interchangeable cross-reference
interchangeable
805805-1Interchangeable
interchangeable cross-reference
interchangeable
19282Interchangeable
interchangeable cross-reference
interchangeable
M-5227Interchangeable
interchangeable cross-reference
interchangeable
6540NCM105159Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 19282?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 19282?
19282 is a CUP,TAPERED ROLLER BEARING manufactured by Jumbo.
What parts can replace 19282?
There are 9 known substitutes for 19282: 88507LT, 88507CE1BT2, 805805-1 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 19282?
19282 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0537. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 19282

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026