PartsTable
Technical Data Sheet
922C ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CHARGER,BATTERY is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include material: STEEL BAND, overall_width: 0.688 INCHES NOMINAL IN, style_designator: TWO PIECE, material_thickness: 0.093 INCHES NOMINAL IN, loop_inside_diameter: 4.125 INCHES NOMINAL IN, end_item_identification: ATCT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-467-3734, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
922C
NSN: 5340-00-467-3734
FSC: 5340
CAGE: 81138 — HAVILAND ARNOLD CO (USA)
SPECIFICATIONS
materialSTEEL BAND
overall_width0.688 INCHES NOMINAL IN
style_designatorTWO PIECE
material_thickness0.093 INCHES NOMINAL IN
loop_inside_diameter4.125 INCHES NOMINAL IN
end_item_identificationATCT
NSN5340-00-467-3734
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 922C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL BAND
MATERIAL THICKNESS: 0.093 INCHES NOMINAL IN
STYLE DESIGNATOR: TWO PIECE
LOOP INSIDE DIAMETER: 4.125 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BAND
MATERIAL THICKNESS0.093 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
LOOP INSIDE DIAMETER4.125 INCHES NOMINAL IN
OVERALL WIDTH0.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
3038-9012PC4Upgraded Successor
successor cross-reference
successor
4Upgraded Successor
successor cross-reference
successor
6R4Upgraded Successor
successor cross-reference
successor
M5501/1-4Upgraded Successor
successor cross-reference
successor
10117358Upgraded Successor
successor cross-reference
successor
5-4Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 922C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 922C?
922C is a CHARGER,BATTERY.
What parts can replace 922C?
There are 24 known substitutes for 922C: 3038-9012PC4, 4, 6R4 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 922C?
922C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-467-3734. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 922C