6R4 — CLAMP,LOOP
✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW
6R4: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.047 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-00-222-8562, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
6R4
NSN: 5340-00-222-8562 FSC: 5340 — Hardware, CommercialCAGE: 79307 — WHITEHEAD METALS INC (USA)
SPECIFICATIONS
diameter 0.204 INCHES NOMINAL IN material PLASTIC BAND overall_width 0.500 INCHES NOMINAL IN style_designator SINGLE LOOP tongue_hole_type ROUND, UNTHREADED material_thickness 0.047 INCHES NOMINAL IN loop_inside_diameter 0.250 INCHES NOMINAL IN distance_from_loop_center_to_tongue_end 0.672 INCHES NOMINAL IN center_to_center_distance_between_loop_and_mounting_hole 0.422 INCHES NOMINAL IN NSN 5340-00-222-8562
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 6R4
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• STYLE DESIGNATOR: SINGLE LOOP
• DIAMETER: 0.204 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
• DISTANCE FROM LOOP CENTER TO TONGUE END: 0.672 INCHES NOMINAL IN
• TONGUE HOLE TYPE: ROUND, UNTHREADED
• CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.422 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATOR SINGLE LOOP DIAMETER 0.204 INCHES NOMINAL IN OVERALL WIDTH 0.500 INCHES NOMINAL IN MATERIAL THICKNESS 0.047 INCHES NOMINAL IN DISTANCE FROM LOOP CENTER TO TONGUE END 0.672 INCHES NOMINAL IN TONGUE HOLE TYPE ROUND, UNTHREADED CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE 0.422 INCHES NOMINAL IN MATERIAL PLASTIC BAND LOOP INSIDE DIAMETER 0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 8
4 Reference document Same NSN cross-reference
Reference document — Secondary reference
602436 Reference document Same NSN cross-reference
Reference document — Secondary reference
12-304 Reference document Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
CLE1-4 Reference document Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
511B7-3 Reference document Same NSN cross-reference
Reference document — Secondary reference
70-100104-4 Reference document Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN status Cancelled · U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demand No demilitarization required
Ready to buy 6R4?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6R4?
6R4 is a CLAMP,LOOP.
What parts can replace 6R4?
There are 8 known substitutes for 6R4: 4, 602436, 12-304 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6R4?
6R4 is cataloged in the U.S. Government catalog under NSN 5340-00-222-8562. This indicates validated use in U.S. government and defense supply chains.