PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3038-9012PC4
3038-9012PC4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.047 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-222-8562, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3038-9012PC4
NSN: 5340-00-222-8562
FSC: 5340
CAGE: 95542 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialPLASTIC BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.047 INCHES NOMINAL IN
loop_inside_diameter0.250 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.672 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.422 INCHES NOMINAL IN
NSN5340-00-222-8562
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3038-9012PC4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL: PLASTIC BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.672 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.047 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.422 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
MATERIALPLASTIC BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.672 INCHES NOMINAL IN
MATERIAL THICKNESS0.047 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.422 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
7002308P4Upgraded Successor
successor cross-reference
successor
A653-56Upgraded Successor
successor cross-reference
successor
833Upgraded Successor
successor cross-reference
successor
404-003Upgraded Successor
successor cross-reference
successor
INDX2LFEUSA120VUpgraded Successor
Simulator,spo2
successor
6515NCM061074Upgraded Successor
Simulator,spo2
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3038-9012PC4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3038-9012PC4?
3038-9012PC4 is a CLAMP,LOOP.
What parts can replace 3038-9012PC4?
There are 22 known substitutes for 3038-9012PC4: 7002308P4, A653-56, 833 and 19 more. Substitute compatibility should be verified for your specific system.
Is 3038-9012PC4 still available?
3038-9012PC4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3038-9012PC4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026