PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 900129-01
900129-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.172 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-0188, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
900129-01
NSN: 5340-00-619-0188
FSC: 5340
CAGE: 90536 — LOCKHEED MARTIN CORP DBA LOCKHEED MARTIN DIV MST - EAGAN (USA)
SPECIFICATIONS
diameter0.172 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
specification/standard_data80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.540 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.360 INCHES NOMINAL IN
NSN5340-00-619-0188
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 900129-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.593 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: F-10001,FSCM 18873 MFR REF SINGLE MATERIAL RESPONSE BAND
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.170 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.130 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END0.593 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONF-10001,FSCM 18873 MFR REF SINGLE MATERIAL RESPONSE BAND
MATERIALPLASTIC POLYAMIDE NYLON BAND
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.170 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.130 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.375 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
HP2NUpgraded Successor
successor cross-reference
successor
2994556-16Upgraded Successor
successor cross-reference
successor
SAE-AS25281Upgraded Successor
successor cross-reference
successor
8955Upgraded Successor
successor cross-reference
successor
NAS1397P2EBUpgraded Successor
successor cross-reference
successor
094430-0000Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 900129-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 900129-01?
900129-01 is a CLAMP,LOOP.
What parts can replace 900129-01?
There are 20 known substitutes for 900129-01: HP2N, 2994556-16, SAE-AS25281 and 17 more. Substitute compatibility should be verified for your specific system.
Is 900129-01 still available?
900129-01 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 900129-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026