PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 094430-0000
094430-0000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.172 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.375 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-754-2183, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
094430-0000
NSN: 5340-00-754-2183
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.172 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.375 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.125 INCHES NOMINAL IN
specification/standard_data80205-NAS1397 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationL-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.540 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.360 INCHES NOMINAL IN
NSN5340-00-754-2183
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 094430-0000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 1.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.170 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER1.500 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
SPECIAL FEATURESC0LOR NATURAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.170 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.455 INCHES NOMINAL IN
OVERALL WIDTH0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
HP2NNYL0CLIPUpgraded Successor
successor cross-reference
successor
G205654-10Upgraded Successor
successor cross-reference
successor
99024228Upgraded Successor
successor cross-reference
successor
SAE-AS25281Upgraded Successor
successor cross-reference
successor
10117443Upgraded Successor
successor cross-reference
successor
9M843-2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 094430-0000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 094430-0000?
094430-0000 is a CLAMP,LOOP.
What parts can replace 094430-0000?
There are 29 known substitutes for 094430-0000: HP2NNYL0CLIP, G205654-10, 99024228 and 26 more. Substitute compatibility should be verified for your specific system.
Is 094430-0000 still available?
094430-0000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 094430-0000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026