PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 8115-160-HR
8115-160-HR ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: PLASTIC PHENOLIC RETAINER, seal_width: 0.346 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN, housing_bore_diameter: 6.985 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN, accommodated_shaft_diameter: 6.980 INCHES MINIMUM AND 7.000 INCHES MAXIMUM IN, material_document_and_classification: L-P-509A FED SPEC SINGLE MATERIAL RESPONSE RETAINER A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-765-2777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
8115-160-HR
NSN: 5330-00-765-2777
FSC: 5330
CAGE: C3125 — GREENE TWEED & CO. GMBHDICHTUNGSSYSTEME (DEU)
SPECIFICATIONS
materialPLASTIC PHENOLIC RETAINER
seal_width0.346 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN
housing_bore_diameter6.985 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
accommodated_shaft_diameter6.980 INCHES MINIMUM AND 7.000 INCHES MAXIMUM IN
material_document_and_classificationL-P-509A FED SPEC SINGLE MATERIAL RESPONSE RETAINER A
NSN5330-00-765-2777
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 8115-160-HR MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-509A FED SPEC SINGLE MATERIAL RESPONSE RETAINER A
•
MATERIAL: PLASTIC PHENOLIC RETAINER
•
ACCOMMODATED SHAFT DIAMETER: 6.980 INCHES MINIMUM AND 7.000 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 6.985 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
•
SEAL WIDTH: 0.346 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-509A FED SPEC SINGLE MATERIAL RESPONSE RETAINER A
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-3065,GRADE SB715BE3Z MIL SPEC SINGLE MATERIAL RESPONSE SINGLE RING
MATERIALPLASTIC PHENOLIC RETAINER
MATERIALRUBBER SYNTHETIC SINGLE RING
ACCOMMODATED SHAFT DIAMETER6.980 INCHES MINIMUM AND 7.000 INCHES MAXIMUM IN
HOUSING BORE DIAMETER6.985 INCHES MINIMUM AND 7.045 INCHES MAXIMUM IN
SEAL WIDTH0.346 INCHES MINIMUM AND 0.366 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
60-306 PIECE 537Interchangeable
interchangeable cross-reference
interchangeable
HHP96-1-64INInterchangeable
interchangeable cross-reference
interchangeable
17-584Interchangeable
interchangeable cross-reference
interchangeable
8115Interchangeable
interchangeable cross-reference
interchangeable
116239Interchangeable
interchangeable cross-reference
interchangeable
1146106Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 8115-160-HR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 8115-160-HR?
8115-160-HR is a SEAL,PLAIN.
What parts can replace 8115-160-HR?
There are 12 known substitutes for 8115-160-HR: 60-306 PIECE 537, HHP96-1-64IN, 17-584 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 8115-160-HR?
8115-160-HR is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-765-2777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 8115-160-HR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026