PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 807138-00
807138-00 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.250 INCHES NOMINAL IN, fork_depth: 0.469 INCHES NOMINAL IN, shank_length: 0.812 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.190 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-530-5352, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
807138-00
NSN: 5340-00-530-5352
FSC: 5340
CAGE: 32345 — DEFENSE REDUCTION AGENCY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.250 INCHES NOMINAL IN
fork_depth0.469 INCHES NOMINAL IN
shank_length0.812 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.190 INCHES NOMINAL IN
overall_width0.313 INCHES NOMINAL IN
thread_length0.313 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.281 INCHES NOMINAL IN
fork_span_width0.150 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionLEFT-HAND ROD CONNECTION
NSN5340-00-530-5352
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 807138-00 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
THREAD LENGTH: 0.313 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.190 INCHES NOMINAL IN
•
THREAD CLASS: 3B ROD CONNECTION
•
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END: 0.281 INCHES NOMINAL IN
•
THREAD DIRECTION: LEFT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS (FLIS)
SHANK DIAMETER0.281 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
THREAD LENGTH0.313 INCHES NOMINAL ROD CONNECTION IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.190 INCHES NOMINAL IN
THREAD CLASS3B ROD CONNECTION
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END0.281 INCHES NOMINAL IN
THREAD DIRECTIONLEFT-HAND ROD CONNECTION
METALLIC HARDNESS RATING26.0 MINIMUM ROCKWELL C AND 31.0 MAXIMUM ROCKWELL C
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END1.531 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
AN665-80RAInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-5683Interchangeable
interchangeable cross-reference
interchangeable
AN665-155RInterchangeable
interchangeable cross-reference
interchangeable
AN665-155LInterchangeable
interchangeable cross-reference
interchangeable
AN665-247LInterchangeable
interchangeable cross-reference
interchangeable
AN665-115RInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 807138-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 807138-00?
807138-00 is a CLEVIS,ROD END.
What parts can replace 807138-00?
There are 12 known substitutes for 807138-00: AN665-80RA, MIL-DTL-5683, AN665-155R and 9 more. Substitute compatibility should be verified for your specific system.
Is 807138-00 still available?
807138-00 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 807138-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026