PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN665-155L
AN665-155L ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.594 INCHES NOMINAL IN, fork_depth: 1.188 INCHES NOMINAL IN, shank_length: 1.360 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5708, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN665-155L
NSN: 5340-00-205-5708
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.594 INCHES NOMINAL IN
fork_depth1.188 INCHES NOMINAL IN
shank_length1.360 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
thread_class3B ROD CONNECTION
hole_diameter0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
overall_width0.808 INCHES MINIMUM AND 0.823 INCHES MAXIMUM IN
thread_length0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM ROD CONNECTION IN
shank_diameter0.703 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN
fork_span_width0.406 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionLEFT-HAND ROD CONNECTION
NSN5340-00-205-5708
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN665-155L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNF ROD CONNECTION
•
THREAD CLASS: 3B ROD CONNECTION
•
SHANK DIAMETER: 0.703 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
THREAD LENGTH: 0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM ROD CONNECTION IN
•
NOMINAL THREAD SIZE: 0.500 INCHES ROD CONNECTION IN
•
FORK ARM THICKNESS: 0.196 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNF ROD CONNECTION
THREAD CLASS3B ROD CONNECTION
SHANK DIAMETER0.703 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
THREAD LENGTH0.828 INCHES MINIMUM AND 0.922 INCHES MAXIMUM ROD CONNECTION IN
NOMINAL THREAD SIZE0.500 INCHES ROD CONNECTION IN
FORK ARM THICKNESS0.196 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
HOLE DIAMETER0.500 INCHES MINIMUM AND 0.503 INCHES MAXIMUM IN
SHANK LENGTH1.360 INCHES MINIMUM AND 1.490 INCHES MAXIMUM IN
END RADIUS0.594 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AN665-80RAInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-5683Interchangeable
interchangeable cross-reference
interchangeable
AN665-155RInterchangeable
interchangeable cross-reference
interchangeable
AN665-247LInterchangeable
interchangeable cross-reference
interchangeable
AN665-115RInterchangeable
interchangeable cross-reference
interchangeable
AN665-46RInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN665-155L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN665-155L?
AN665-155L is a CLEVIS,ROD END.
What parts can replace AN665-155L?
There are 14 known substitutes for AN665-155L: AN665-80RA, MIL-DTL-5683, AN665-155R and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN665-155L?
AN665-155L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5708. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN665-155L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026