PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AN665-247L
AN665-247L ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.750 INCHES NOMINAL IN, fork_depth: 1.500 INCHES NOMINAL IN, shank_length: 1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.025 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AN665-247L
NSN: 5340-00-205-5709
FSC: 5340
CAGE: 88044 — AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.750 INCHES NOMINAL IN
fork_depth1.500 INCHES NOMINAL IN
shank_length1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
thread_class3B ROD CONNECTION
hole_diameter0.025 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
overall_width1.027 INCHES MINIMUM AND 1.042 INCHES MAXIMUM IN
thread_length1.078 INCHES MINIMUM AND 1.172 INCHES MAXIMUM ROD CONNECTION IN
shank_diameter0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
fork_span_width0.501 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionLEFT-HAND ROD CONNECTION
NSN5340-00-205-5709
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AN665-247L MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CLEVIS
•
FORK SPAN WIDTH: 0.501 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
•
SHANK DIAMETER: 0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
METALLIC HARDNESS RATING: 26.0 MINIMUM ROCKWELL C AND 32.0 MAXIMUM ROCKWELL C
•
FORK ARM THICKNESS: 0.250 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.025 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
•
THREAD DIRECTION: LEFT-HAND ROD CONNECTION
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCLEVIS
FORK SPAN WIDTH0.501 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
SHANK DIAMETER0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
OVERALL WIDTH1.027 INCHES MINIMUM AND 1.042 INCHES MAXIMUM IN
METALLIC HARDNESS RATING26.0 MINIMUM ROCKWELL C AND 32.0 MAXIMUM ROCKWELL C
FORK ARM THICKNESS0.250 INCHES MINIMUM AND 0.268 INCHES MAXIMUM IN
HOLE DIAMETER0.025 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
THREAD DIRECTIONLEFT-HAND ROD CONNECTION
SHANK LENGTH1.610 INCHES MINIMUM AND 1.640 INCHES MAXIMUM IN
NOMINAL THREAD SIZE0.625 INCHES ROD CONNECTION IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
AN665-80RAInterchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-5683Interchangeable
interchangeable cross-reference
interchangeable
AN665-155RInterchangeable
interchangeable cross-reference
interchangeable
AN665-155LInterchangeable
interchangeable cross-reference
interchangeable
AN665-115RInterchangeable
interchangeable cross-reference
interchangeable
AN665-46RInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AN665-247L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AN665-247L?
AN665-247L is a CLEVIS,ROD END.
What parts can replace AN665-247L?
There are 14 known substitutes for AN665-247L: AN665-80RA, MIL-DTL-5683, AN665-155R and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AN665-247L?
AN665-247L is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-205-5709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AN665-247L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026