PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7601513-4
7601513-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL, overall_width: 0.135 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, material_thickness: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-9872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7601513-4
NSN: 5340-00-001-9872
FSC: 5340
CAGE: 93322 — GE AVIATION SYSTEMS LLC DBA GE AVIATION (USA)
SPECIFICATIONS
diameter0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
overall_width0.135 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
material_thickness0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
loop_inside_diameter0.156 INCHES NOMINAL IN
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.358 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.202 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN
NSN5340-00-001-9872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7601513-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.156 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.202 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
•
DIAMETER: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.156 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.202 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
SPECIAL FEATURESCOLOR BLACK
OVERALL WIDTH0.135 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
DIAMETER0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.358 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1377658-002Upgraded Successor
successor cross-reference
successor
FINY-156BKUpgraded Successor
successor cross-reference
successor
MPL-1197Interchangeable
interchangeable cross-reference
interchangeable
W96302Interchangeable
interchangeable cross-reference
interchangeable
10140Interchangeable
interchangeable cross-reference
interchangeable
10140-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7601513-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7601513-4?
7601513-4 is a CLAMP,LOOP.
What parts can replace 7601513-4?
There are 9 known substitutes for 7601513-4: 1377658-002, FINY-156BK, MPL-1197 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7601513-4?
7601513-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-9872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7601513-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026