PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FINY-156BK
FINY-156BK ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.096 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.160 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-9872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FINY-156BK
NSN: 5340-00-001-9872
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
diameter0.096 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.160 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.030 INCHES NOMINAL IN
loop_inside_diameter0.156 INCHES NOMINAL IN
material_document_and_classificationASTM D4066,TYPE PA,GROUP 1,CLASS 1,GRADE 1 THROUGH 7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.358 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.233 INCHES NOMINAL IN
NSN5340-00-001-9872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FINY-156BK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.156 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.202 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
•
DIAMETER: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.156 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.202 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
SPECIAL FEATURESCOLOR BLACK
OVERALL WIDTH0.135 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
DIAMETER0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.358 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
1377658-002Upgraded Successor
successor cross-reference
successor
FINY-156BKUpgraded Successor
successor cross-reference
successor
MPL-1197Interchangeable
interchangeable cross-reference
interchangeable
W96302Interchangeable
interchangeable cross-reference
interchangeable
10140Interchangeable
interchangeable cross-reference
interchangeable
10140-10Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FINY-156BK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FINY-156BK?
FINY-156BK is a CLAMP,LOOP.
What parts can replace FINY-156BK?
There are 10 known substitutes for FINY-156BK: 1377658-002, FINY-156BK, MPL-1197 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FINY-156BK?
FINY-156BK is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-001-9872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FINY-156BK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026