PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1377658-002
1377658-002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.096 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON OVERALL, overall_width: 0.160 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.030 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-351-9486, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1377658-002
NSN: 5340-01-351-9486
FSC: 5340
CAGE: 94117 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
diameter0.096 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON OVERALL
overall_width0.160 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.030 INCHES NOMINAL IN
loop_inside_diameter0.156 INCHES NOMINAL IN
material_document_and_classificationASTM D4066,TYPE PA,GROUP 1,CLASS 1,GRADE 1 THROUGH 7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end0.358 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.233 INCHES NOMINAL IN
NSN5340-01-351-9486
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1377658-002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066,TYPE PA,GROUP 1,CLASS 1,GRADE 1 THROUGH 7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.096 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
LOOP INSIDE DIAMETER: 0.156 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.358 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.233 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066,TYPE PA,GROUP 1,CLASS 1,GRADE 1 THROUGH 7 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.160 INCHES NOMINAL IN
DIAMETER0.096 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
LOOP INSIDE DIAMETER0.156 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.358 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.233 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
F1NY-156-0-MUpgraded Successor
successor cross-reference
successor
13029152-4Upgraded Successor
successor cross-reference
successor
FINY-156BKUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1377658-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1377658-002?
1377658-002 is a CLAMP,LOOP.
What parts can replace 1377658-002?
There are 3 known substitutes for 1377658-002: F1NY-156-0-M, 13029152-4, FINY-156BK. Substitute compatibility should be verified for your specific system.
What is the NSN for 1377658-002?
1377658-002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-351-9486. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1377658-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026