PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7215B
7215B ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 75.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 25.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7215B
NSN: 3110-00-156-8182
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter75.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width25.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter130.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
standard_tolerance_designationABEC NO.1
NSN3110-00-156-8182
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7215B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 75.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 130.00 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
BORE DIAMETER75.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER130.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL BALL
MATERIALSTEEL OUTER RING
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL INNER RING
LOAD DIRECTIONANGULAR
INTERNAL FIT-UP DESIGNATIONSTANDARD
CONTACT ANGLE25.0 DEGREES MINIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
302-15Interchangeable
interchangeable cross-reference
interchangeable
53-215Interchangeable
interchangeable cross-reference
interchangeable
X400Interchangeable
interchangeable cross-reference
interchangeable
357-9456-00Interchangeable
interchangeable cross-reference
interchangeable
3382Interchangeable
interchangeable cross-reference
interchangeable
K3382Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7215B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7215B?
7215B is a BEARING,BALL,ANNULAR.
What parts can replace 7215B?
There are 21 known substitutes for 7215B: 302-15, 53-215, X400 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7215B?
7215B is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7215B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026