PartsTable
Technical Data Sheet
Download PDF

3382 — ALIGNMENT CLIP,LEAF SPRING

✓ Government record, cited
APC · MRO · MRO_GENERAL
PRODUCT OVERVIEW

3382: ALIGNMENT CLIP,LEAF SPRING.

- Easily connects a Dual Mode DisplayPort supported PC to an HDMI enabled HDTV, monitor or projector - DisplayPort and HDMI compatible for superior picture quality - Latching connector prevents cable from falling off - Cable Adapter transfers uncompressed high-definition Digital Video signals - Supports HDTV resolutions up to 12 bit color depth at 1080p and 1920x1200 computer resolution - Support Dual Mode DP source with active DDC buffering - Compatible with HDMI 1.3 specification up to 2.5Gbps - Pass through HDCP from ++DP toHDMI This part is cataloged in the U.S. Government catalog under NSN 3110-00-100-0768, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3382
NSN: 3110-00-100-0768
NIINs: 001000768, 003607229, 003902490, 007521741, 009811379, 010222145, 010861514, 011081206, 011658248, 011659619, 011679212, 012129253, 012822760, 013652959, 013814512, 014149314, 014230660, 014266975, 014391073, 015106788, 016787284
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVSUP-WSS ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
NSN3110-00-100-0768
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3382 · APC ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1965 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.5625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1965 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
K3382Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
30215Reference document
Same NSN cross-reference
Reference document — Secondary reference
672578Reference document
Same NSN cross-reference
Reference document — Secondary reference
ME114-1MReference document
Same NSN cross-reference
Reference document — Secondary reference
4253302Reference document
Same NSN cross-reference
Reference document — Secondary reference
ME114-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3382?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3382?
3382 is a ALIGNMENT CLIP,LEAF SPRING manufactured by APC. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3382?
There are 7 known substitutes for 3382: K3382, 30215, 672578 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3382?
3382 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3382

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.