PartsTable
Technical Data Sheet
Download PDF

K3382 — CONE AND ROLLERS,TAPERED ROLLER

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

K3382: CONE AND ROLLERS,TAPERED ROLLER.

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.1965 INCHES NOMINAL IN, bore_diameter: 1.5625 INCHES NOMINAL IN, overall_width: 1.000 INCHES MAXIMUM IN, overall_height: 2.862 INCHES MAXIMUM IN, overall_length: 2.929 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0768, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ K3382
NSN: 3110-00-100-0768
NIINs: 001000768, 002933382, 011765362
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: F0272 — SKF FRANCE (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.1965 INCHES NOMINAL IN
bore_diameter1.5625 INCHES NOMINAL IN
overall_width1.000 INCHES MAXIMUM IN
overall_height2.862 INCHES MAXIMUM IN
overall_length2.929 INCHES MAXIMUM IN
special_featuresREACTOR 3; TRANSFORMER 3
style_designatorNORMAL ANGLE
cone_corner_radius0.1406 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
general_characteristics_item_descriptionPLIER OPERATED; STANDARD; FOR 1/4 IN. DIA HOLE; 0 TO 1/2 IN. GRIP RANGE; COPPER COLOR CODED; 1/4 IN. DRILL IN
NSN3110-00-100-0768
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: K3382 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 1.1965 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.5625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH1.1965 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.5625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
30215Reference document
Same NSN cross-reference
Reference document — Secondary reference
3382Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
672578Reference document
Same NSN cross-reference
Reference document — Secondary reference
ME114-1MReference document
Same NSN cross-reference
Reference document — Secondary reference
4253302Reference document
Same NSN cross-reference
Reference document — Secondary reference
ME114-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy K3382?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is K3382?
K3382 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace K3382?
There are 7 known substitutes for K3382: 30215, 3382, 672578 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for K3382?
K3382 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0768. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — K3382

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.