PartsTable / COMPONENT / 63X912
63X912
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 2.690 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.686 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-178-2284, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
63X912
NSN: 5330-00-178-2284 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material STEEL CASE case_style SQUARE seal_width 0.500 INCHES NOMINAL IN outside_diameter 2.690 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 2.686 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.750 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-178-2284
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 63X912
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• SEAL WIDTH: 0.500 INCHES NOMINAL IN
• SURFACE TREATMENT: PLASTIC CASE
• OUTSIDE DIAMETER: 2.690 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT SEAL WIDTH 0.500 INCHES NOMINAL IN SURFACE TREATMENT PLASTIC CASE MATERIAL STEEL CASE MATERIAL LEATHER SEALING ELEMENT OUTSIDE DIAMETER 2.690 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 1.750 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR HOUSING BORE DIAMETER 2.686 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
17484 Interchangeable interchangeable cross-reference
interchangeable
A42555 Interchangeable interchangeable cross-reference
interchangeable
56613 Interchangeable interchangeable cross-reference
interchangeable
S10B Interchangeable interchangeable cross-reference
interchangeable
7S10FEDERAL Interchangeable interchangeable cross-reference
interchangeable
7010B Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 63X912?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 63X912?
63X912 is a SEAL,PLAIN ENCASED.
What parts can replace 63X912?
There are 25 known substitutes for 63X912: 17484, A42555, 56613 and 22 more. Substitute compatibility should be verified for your specific system.
Is 63X912 still available?
63X912 is currently cancelled.