PartsTable
Technical Data Sheet
PartsTable / COMPONENT / S10B
S10B ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1070 OVERALL, hole_diameter: 0.406 INCHES NOMINAL IN, overall_height: 0.125 INCHES NOMINAL IN, outside_diameter: 1.164 INCHES NOMINAL IN, style_designator: SPRING TENSION, material_thickness: 0.010 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-227-4897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
S10B
NSN: 5310-00-227-4897
FSC: 5310
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL COMP 1070 OVERALL
hole_diameter0.406 INCHES NOMINAL IN
overall_height0.125 INCHES NOMINAL IN
outside_diameter1.164 INCHES NOMINAL IN
style_designatorSPRING TENSION
material_thickness0.010 INCHES NOMINAL IN
end_item_identificationW/S: KIDD CLASS DDG; FORRESTAL CLASS CV; SPRUANCE CLASS DD (963); SUPPLY CLASS AOE; NIMITZ CLASS CVN; WASP CLASS LHD; TARAWA CLASS LHA; OLIVER PERRY CLASS FFG; FMS-KNOX CLASS FF
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-227-4897
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: S10B · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.164 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.406 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1070 OVERALL
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPRING TENSION
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.164 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S: KIDD CLASS DDG; FORRESTAL CLASS CV; SPRUANCE CLASS DD (963); SUPPLY CLASS AOE; NIMITZ CLASS CVN; WASP CLASS LHD; TARAWA CLASS LHA; OLIVER PERRY CLASS FFG; FMS-KNOX CLASS FF
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.406 INCHES NOMINAL IN
MATERIALSTEEL COMP 1070 OVERALL
OVERALL HEIGHT0.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
STYLE DESIGNATORSPRING TENSION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
BS04179Interchangeable
interchangeable cross-reference
interchangeable
L3531BInterchangeable
interchangeable cross-reference
interchangeable
63X912Interchangeable
interchangeable cross-reference
interchangeable
12949Interchangeable
interchangeable cross-reference
interchangeable
SAE-J512Interchangeable
interchangeable cross-reference
interchangeable
5-4 060202BAInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy S10B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is S10B?
S10B is a WASHER,SPRING TENSION.
What parts can replace S10B?
There are 18 known substitutes for S10B: BS04179, L3531B, 63X912 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for S10B?
S10B is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-227-4897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — S10B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026