PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 17484
17484 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CYLINDER ASSEMBLY,HYDRAULIC BRAK. Key specifications include special_features: DEPOT PARTNERING KIT; AGEN BALANCED MISCELLANEOUS INSURANCE KIT; CONTAINS SUPPORTING REPAIR HARDWARE, end_item_identification: F/A-22 RAPTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-048-6323, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
17484
NSN: 5330-00-048-6323
FSC: 5330
CAGE: 70188 — FRANKLIN ENGINE CO INC (USA)
SPECIFICATIONS
special_featuresDEPOT PARTNERING KIT; AGEN BALANCED MISCELLANEOUS INSURANCE KIT; CONTAINS SUPPORTING REPAIR HARDWARE
end_item_identificationF/A-22 RAPTOR
NSN5330-00-048-6323
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 17484 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: CLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE CORNER RADIUS: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
BOLT HOLE QUANTITY: 2
•
APERTURE DIAMETER: 1.785 INCHES MINIMUM AND 1.800 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 1.0575 INCHES MINIMUM AND 1.0675 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE CORNER RADIUS0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
HOLE DIAMETER0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
BOLT HOLE QUANTITY2
APERTURE DIAMETER1.785 INCHES MINIMUM AND 1.800 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER1.0575 INCHES MINIMUM AND 1.0675 INCHES MAXIMUM IN
OVERALL WIDTH3.032 INCHES MINIMUM AND 3.082 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
A42555Interchangeable
interchangeable cross-reference
interchangeable
56613Interchangeable
interchangeable cross-reference
interchangeable
1-748-4Interchangeable
interchangeable cross-reference
interchangeable
BS04179Interchangeable
interchangeable cross-reference
interchangeable
L3531BInterchangeable
interchangeable cross-reference
interchangeable
63X912Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 17484?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 17484?
17484 is a CYLINDER ASSEMBLY,HYDRAULIC BRAK.
What parts can replace 17484?
There are 12 known substitutes for 17484: A42555, 56613, 1-748-4 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 17484?
17484 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-048-6323. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 17484

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026