PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 610 466 R91
610 466 R91 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1090 OR STEEL COMP 1095 ROLLER, bore_diameter: 1.3125 INCHES NOMINAL IN, overall_width: 0.6250 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-817-7501, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
610 466 R91
NSN: 3110-00-817-7501
FSC: 3110
CAGE: 31007 — NAVISTAR INTERNATIONAL CORPORATION DBA NAVISTAR (USA)
SPECIFICATIONS
materialSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
bore_diameter1.3125 INCHES NOMINAL IN
overall_width0.6250 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
features_providedLUBRICATION HOLE
overall_outside_diameter1.6250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES ROLLER
NSN3110-00-817-7501
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 610 466 R91 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCES FOR JOURNAL BEARINGS
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OUTER RING
•
OVERALL OUTSIDE DIAMETER: 1.6250 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 1.3125 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 OUTER RING
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCES FOR JOURNAL BEARINGS
OVERALL WIDTH0.6250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OR AISI ASSN STD ALL MATERIAL RESPONSES OUTER RING
OVERALL OUTSIDE DIAMETER1.6250 INCHES NOMINAL IN
SURFACE FINISHGROUND
BORE DIAMETER1.3125 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1022 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1035 OR STEEL COMP 1040 OR STEEL COMP 1042 OR STEEL COMP 1045 OR STEEL COMP 1046 OR STEEL COMP 1548 OR STEEL COMP 1049 OR STEEL COMP 1050 OUTER RING
ALIGNMENT TYPERIGID
FEATURES PROVIDEDLUBRICATION HOLE
MATERIALSTEEL COMP 1090 OR STEEL COMP 1095 ROLLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
359950R91Interchangeable
interchangeable cross-reference
interchangeable
A24501-12Interchangeable
interchangeable cross-reference
interchangeable
MS17131Interchangeable
interchangeable cross-reference
interchangeable
8130869Interchangeable
interchangeable cross-reference
interchangeable
A28229Interchangeable
interchangeable cross-reference
interchangeable
9090295Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 610 466 R91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 610 466 R91?
610 466 R91 is a BEARING,ROLLER,NEEDLE.
What parts can replace 610 466 R91?
There are 32 known substitutes for 610 466 R91: 359950R91, A24501-12, MS17131 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 610 466 R91?
610 466 R91 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-817-7501. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 610 466 R91

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026