PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6019-101A
6019-101A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN, length: 0.910 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN, overall_height: 1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-248-4756, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6019-101A
NSN: 5340-01-248-4756
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN
length0.910 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
materialSTEEL OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
overall_height1.080 INCHES MINIMUM AND 1.120 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
loop/holding_dimension0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.543 INCHES MINIMUM IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-248-4756
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6019-101A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.543 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING DIMENSION0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM IN
MATERIAL THICKNESS0.025 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.147 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.543 INCHES MINIMUM IN
LENGTH0.910 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
5340004861924Upgraded Successor
successor cross-reference
successor
457-5671Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
416949-7Upgraded Successor
successor cross-reference
successor
139-2230-000Upgraded Successor
successor cross-reference
successor
100-200-5-10Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6019-101A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6019-101A?
6019-101A is a CLIP,SPRING TENSION.
What parts can replace 6019-101A?
There are 23 known substitutes for 6019-101A: 5340004861924, 457-5671, MIL-C-24066/2 and 20 more. Substitute compatibility should be verified for your specific system.
Is 6019-101A still available?
6019-101A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6019-101A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026