PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 139-2230-000
139-2230-000 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN, length: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_height: 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-026-2135, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
139-2230-000
NSN: 5340-00-026-2135
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
width0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
length0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_height0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
loop/holding_dimension0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.191 INCHES MINIMUM IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-026-2135
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 139-2230-000 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
WIDTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.191 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
WIDTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
MATERIAL THICKNESS0.009 INCHES MINIMUM AND 0.015 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END0.191 INCHES MINIMUM IN
OVERALL HEIGHT0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
LENGTH0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
MILC24066-2Upgraded Successor
successor cross-reference
successor
M24066/2-011Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 139-2230-000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 139-2230-000?
139-2230-000 is a CLIP,SPRING TENSION.
What parts can replace 139-2230-000?
There are 22 known substitutes for 139-2230-000: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 19 more. Substitute compatibility should be verified for your specific system.
Is 139-2230-000 still available?
139-2230-000 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 139-2230-000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026