PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6012-102CC
6012-102CC ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.375 INCHES NOMINAL IN, length: 0.600 INCHES NOMINAL IN, material: COPPER ALLOY 172 OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.690 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-452-2291, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6012-102CC
NSN: 5340-00-452-2291
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
length0.600 INCHES NOMINAL IN
materialCOPPER ALLOY 172 OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.690 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.022 INCHES NOMINAL IN
loop/holding_dimension0.562 INCHES NOMINAL IN
distance_from_loop_center_to_end0.361 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,ALLOY 172 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-452-2291
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6012-102CC MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
WIDTH: 0.375 INCHES NOMINAL IN
•
LENGTH: 0.600 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.562 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
WIDTH0.375 INCHES NOMINAL IN
LENGTH0.600 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.562 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
OVERALL HEIGHT0.690 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.361 INCHES NOMINAL IN
MATERIALCOPPER ALLOY 172 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
5340004861924Upgraded Successor
successor cross-reference
successor
457-5671Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2Upgraded Successor
successor cross-reference
successor
416949-7Upgraded Successor
successor cross-reference
successor
139-2230-000Upgraded Successor
successor cross-reference
successor
100-200-5-10Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6012-102CC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6012-102CC?
6012-102CC is a CLIP,SPRING TENSION.
What parts can replace 6012-102CC?
There are 28 known substitutes for 6012-102CC: 5340004861924, 457-5671, MIL-C-24066/2 and 25 more. Substitute compatibility should be verified for your specific system.
Is 6012-102CC still available?
6012-102CC is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6012-102CC

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026