PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6001-29A

6001-29A — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 0.400 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.450 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5340-00-060-9031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6001-29A
NSN: 5340-00-060-9031
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length0.400 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.450 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.375 INCHES NOMINAL IN
distance_from_loop_center_to_end0.250 INCHES NOMINAL IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-060-9031
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6001-29A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 0.375 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LOOP/HOLDING DIMENSION0.375 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
OVERALL HEIGHT0.450 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
LENGTH0.400 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
6008-46C012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS28136-101InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS28136InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MS28136-106InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5999007236902InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6008-46AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6001-29A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6001-29A?
6001-29A is a CLIP,SPRING TENSION.
What parts can replace 6001-29A?
There are 11 known substitutes for 6001-29A: 6008-46C012, MS28136-101, MS28136 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6001-29A?
6001-29A is cataloged in the Federal Logistics Information System under NSN 5340-00-060-9031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6001-29A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026