PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6008-46C012
6008-46C012 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.312 INCHES NOMINAL IN, length: 0.280 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, hole_diameter: 0.071 INCHES NOMINAL IN, overall_height: 0.340 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-177-4214, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6008-46C012
NSN: 5340-00-177-4214
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.312 INCHES NOMINAL IN
length0.280 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
hole_diameter0.071 INCHES NOMINAL IN
overall_height0.340 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.260 INCHES NOMINAL IN
distance_from_loop_center_to_end0.190 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533,ALLOY 170,TEMPER 1/4H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-177-4214
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6008-46C012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO END: 0.190 INCHES NOMINAL IN
•
LENGTH: 0.280 INCHES NOMINAL IN
•
WIDTH: 0.312 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533,ALLOY 170,TEMPER 1/4H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: COPPER ALLOY OVERALL
•
LOOP/HOLDING DIMENSION: 0.260 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO END0.190 INCHES NOMINAL IN
LENGTH0.280 INCHES NOMINAL IN
WIDTH0.312 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533,ALLOY 170,TEMPER 1/4H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
LOOP/HOLDING DIMENSION0.260 INCHES NOMINAL IN
HOLE DIAMETER0.071 INCHES NOMINAL IN
OVERALL HEIGHT0.340 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
M24066/2-030Upgraded Successor
successor cross-reference
successor
MIL-C-24066/2-230Upgraded Successor
successor cross-reference
successor
M24066/2-230Upgraded Successor
successor cross-reference
successor
MIL-C-24066Upgraded Successor
successor cross-reference
successor
M24066/2-214Upgraded Successor
successor cross-reference
successor
NASM24066/2Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6008-46C012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6008-46C012?
6008-46C012 is a CLIP,SPRING TENSION.
What parts can replace 6008-46C012?
There are 17 known substitutes for 6008-46C012: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6008-46C012?
6008-46C012 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-177-4214. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6008-46C012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026