PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6008-46A
6008-46A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.312 INCHES NOMINAL IN, length: 0.280 INCHES NOMINAL IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.071 INCHES NOMINAL IN, overall_height: 0.340 INCHES NOMINAL IN, surface_treatment: CADMIUM OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-725-3016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6008-46A
NSN: 5340-00-725-3016
FSC: 5340
CAGE: 91506 — AUGAT INC (USA)
SPECIFICATIONS
width0.312 INCHES NOMINAL IN
length0.280 INCHES NOMINAL IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.071 INCHES NOMINAL IN
overall_height0.340 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.260 INCHES NOMINAL IN
distance_from_loop_center_to_end0.190 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-725-3016
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6008-46A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1065 OVERALL
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
WIDTH: 0.312 INCHES NOMINAL IN
•
LENGTH: 0.280 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.190 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.071 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.260 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1065 OVERALL
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
WIDTH0.312 INCHES NOMINAL IN
LENGTH0.280 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.190 INCHES NOMINAL IN
HOLE DIAMETER0.071 INCHES NOMINAL IN
OVERALL HEIGHT0.340 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.260 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
M24066/3-104Interchangeable
interchangeable cross-reference
interchangeable
418327-4Interchangeable
interchangeable cross-reference
interchangeable
MS28136-4Interchangeable
interchangeable cross-reference
interchangeable
6008-46C012Interchangeable
interchangeable cross-reference
interchangeable
MS28136-101Interchangeable
interchangeable cross-reference
interchangeable
MS28136Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6008-46A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6008-46A?
6008-46A is a CLIP,SPRING TENSION.
What parts can replace 6008-46A?
There are 9 known substitutes for 6008-46A: M24066/3-104, 418327-4, MS28136-4 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6008-46A?
6008-46A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-725-3016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6008-46A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026