Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, length: 0.390 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, overall_height: 0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-014-4594, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
6001-107A
NSN:5340-01-014-4594 FSC:5340 CAGE:00779 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
width
1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
length
0.390 INCHES MINIMUM AND 0.430 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
overall_height
0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
special_test_features
SPECIAL QUALITY CONTROL TESTING
loop/holding_dimension
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
departure_from_cited_document
AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
distance_from_loop_center_to_end
0.222 INCHES NOMINAL IN
NSN
5340-01-014-4594
COMPONENT DIAGRAM
KEY FEATURES
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
WIDTH: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
DEPARTURE FROM CITED DOCUMENT
AS MODIFIED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SPECIAL TEST FEATURES
SPECIAL QUALITY CONTROL TESTING
MOUNTING METHOD
UNTHREADED HOLE(S)
WIDTH
1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
OVERALL HEIGHT
0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.015 INCHES MINIMUM AND 0.021 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6001-107A?
6001-107A is a CLIP,SPRING TENSION.
What parts can replace 6001-107A?
There are 27 known substitutes for 6001-107A: 5340004861924, 457-5671, MIL-C-24066/2 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6001-107A?
6001-107A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-014-4594. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.