The Fuseholder,extractor Post, cataloged under National Stock Number 5920-00-912-6494, is classified within Federal Supply Class 5920 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 6 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5920-00-912-6494 |
| Primary Part Number | MIL-F-19207/18 |
| Item Name | Fuseholder,extractor Post |
| FSC / FSG | 5920 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | CANCELLED |
| Test Data Document | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Material Document and Classification | MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| Fuse Accommodation Quantity | 2 |
| Accommodated Ferrule Diameter | 0.250 INCHES NOMINAL IN |
| Mounting Hole Diameter | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM IN |
| Bushing Hole Diameter | 0.869 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN |
| Center to Center Distance Between Outside Mounting Holes Along Width | 0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN |
| Terminal Type and Quantity | 4 THREADED STUD |
| Indicating Lamp Voltage Range in Volts | +34.0 TO 45.0 |
| Voltage in Volts | 45.0 |
| Material | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY |
| Screw Thread Diameter | 0.164 INCHES NOMINAL IN |
| Specification/standard Data | 81349-MIL-F-19207/18 GOVERNMENT SPECIFICATION |
| Precious Material | SILVER |
| Accommodated Fuse Length | 1.250 INCHES NOMINAL IN |
| Material | COPPER ALLOY TERMINAL |
| Interruption Indicator Method | INCANDESCENT LAMP |
| Fuse Terminal Type Accommodated | FERRULE |
| Center to Center Distance Between Keyway and Bushing Hole | 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM IN |
| Precious Material and Location | CONTACT SURFACES SILVER |
| Resistor Rating | 680.0 OHMS |
| Environmental Protection | DRIPPROOF |
| Length From Front Protrusion to Mounting Surface | 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Material | COPPER ALLOY CONTACT |
| Mounting Hole Style | 2 BUSHING MOUNTING W/2 HOLES |
| Surface Treatment Document and Classification | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| Mounting Hole Quantity | 2 |
| Body Style | PANEL MOUNTED TYPE |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-F-19207/18 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| FHL29G-003 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-19207/18 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| FHL29G-3 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5920-00-912-6494 is a Fuseholder,extractor Post, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5920 (No Item Name Available). Status: cancelled.
NSN 5920-00-912-6494 has 4 cross-referenced part numbers: MIL-F-19207/18 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), FHL29G-003 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-19207/18 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), FHL29G-3 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 6 known substitutes for 5920-00-912-6494: 5920-00-053-8958, 5920-00-421-0952, 5920-00-752-3030 and 3 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-F-19207/18: Test Data Document: 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Overall Height: 1.812 INCHES MINIMUM AND 1.817 INCHES MAXIMUM IN; Material Document and Classification: MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY; Fuse Accommodation Quantity: 2. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5920-00-912-6494 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.