PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MIL-PRF-19207/18
MIL-PRF-19207/18 ✓ Verified by PartsTable
— · COMPONENT
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

The MIL-PRF-19207/18 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5920-00-053-8958, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MIL-PRF-19207/18
NSN: 5920-00-053-8958
FSC: 5920
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
Part NumberMIL-PRF-19207/18
NSN5920-00-053-8958
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MIL-PRF-19207/18 TITLE COMPONENT PN MIL-PRF-19207/18 MFR MIL-PRF-19207/18
KEY FEATURES
•
RESISTOR RATING: 330.0 OHMS
•
BUSHING HOLE DIAMETER: 0.869 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY
•
SCREW THREAD DIAMETER: 0.164 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY
•
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH: 0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
•
SCREW THREAD QUANTITY PER INCH: 32.0
•
FUSE ACCOMMODATION QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
RESISTOR RATING330.0 OHMS
BUSHING HOLE DIAMETER0.869 INCHES MINIMUM AND 0.879 INCHES MAXIMUM IN
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY
SCREW THREAD DIAMETER0.164 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-14, TYPE SDG MIL SPEC SINGLE MATERIAL RESPONSE BODY
CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH0.933 INCHES MINIMUM AND 0.943 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH32.0
FUSE ACCOMMODATION QUANTITY2
INDICATING LAMP VOLTAGE RANGE IN VOLTS+23.0 TO 33.0
ACCOMMODATED FERRULE DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
FHL29G2Interchangeable
interchangeable cross-reference
interchangeable
5920PL0994781Interchangeable
interchangeable cross-reference
interchangeable
L00578Interchangeable
interchangeable cross-reference
interchangeable
2002658 REV U ITEM 7Interchangeable
interchangeable cross-reference
interchangeable
S137-5612Interchangeable
interchangeable cross-reference
interchangeable
4133700-22Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy MIL-PRF-19207/18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-PRF-19207/18?
MIL-PRF-19207/18 is a MIL-PRF-19207/18.
What parts can replace MIL-PRF-19207/18?
There are 35 known substitutes for MIL-PRF-19207/18: FHL29G2, 5920PL0994781, L00578 and 32 more. Substitute compatibility should be verified for your specific system.
Is MIL-PRF-19207/18 still available?
MIL-PRF-19207/18 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MIL-PRF-19207/18

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026