The Fuseholder,extractor Post, cataloged under National Stock Number 5920-00-823-0906, is classified within Federal Supply Class 5920 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 26 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 7 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5920-00-823-0906 |
| Primary Part Number | MILF19207-18 |
| Item Name | Fuseholder,extractor Post |
| FSC / FSG | 5920 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Mounting Hole Diameter | 0.156 INCHES NOMINAL IN |
| Current Carrying Rating in Amps | 30.0 |
| Center to Center Distance Between Bushing Holes | 0.800 INCHES NOMINAL IN |
| Fuse Terminal Type Accommodated | FERRULE |
| Accommodated Fuse Length | 1.250 INCHES NOMINAL IN |
| Accommodated Ferrule Diameter | 0.250 INCHES NOMINAL IN |
| Screw Thread Quantity Per Inch | 32.0 |
| Voltage in Volts | 90.0 |
| Center to Center Distance Between Keyway and Bushing Hole | 0.434 INCHES NOMINAL IN |
| Interruption Indicator Method | INCANDESCENT LAMP |
| Indicating Lamp Voltage Range in Volts | +81.0 TO 90.0 |
| Bushing Hole Diameter | 0.874 INCHES NOMINAL IN |
| Terminal Type and Quantity | 4 THREADED STUD |
| Length From Front Protrusion to Mounting Surface | 0.798 INCHES MINIMUM AND 0.828 INCHES MAXIMUM IN |
| Screw Thread Diameter | 0.164 INCHES NOMINAL IN |
| Center to Center Distance Between Outside Mounting Holes Along Width | 0.938 INCHES NOMINAL IN |
| Surface Treatment | SILVER CONTACT |
| Material | COPPER ALLOY CONTACT |
| Resistor Rating | 2.0 KILOHMS |
| Fuse Accommodation Quantity | 2 |
| Test Data Document | 81349-MIL-F-19207/18D SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Surface Treatment Document and Classification | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| Body Style | PANEL MOUNTED TYPE |
| Mounting Hole Style | 2 BUSHING MOUNTING W/2 HOLES |
| Environmental Protection | DRIPPROOF |
| Mounting Hole Quantity | 2 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MILF19207-18 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| FHL29G | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-19207/18 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5920-00-823-0906 is a Fuseholder,extractor Post, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5920 (No Item Name Available). Status: active.
NSN 5920-00-823-0906 has 3 cross-referenced part numbers: MILF19207-18 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), FHL29G (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-19207/18 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 7 known substitutes for 5920-00-823-0906: 5920-00-053-8958, 5920-00-421-0952, 5920-00-752-3030 and 4 more. Verify interchangeability with system specifications before substitution.
Key specifications for MILF19207-18: Mounting Hole Diameter: 0.156 INCHES NOMINAL IN; Overall Length: 3.750 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN; Current Carrying Rating in Amps: 30.0; Center to Center Distance Between Bushing Holes: 0.800 INCHES NOMINAL IN. 29 total characteristics are documented in the Federal Logistics Information System.