PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1770525
5340PL1770525 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER CUSHION, overall_width: 0.500 INCHES NOMINAL IN, special_features: FURNISHED WITH WEDGE, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-200-8559, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1770525
NSN: 5340-00-200-8559
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER CUSHION
overall_width0.500 INCHES NOMINAL IN
special_featuresFURNISHED WITH WEDGE
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.438 INCHES NOMINAL IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.811 INCHES NOMINAL IN
NSN5340-00-200-8559
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1770525 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL: RUBBER CUSHION
•
SURFACE TREATMENT: ANODIZE BAND
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOROFFSET MOUNT
MATERIALRUBBER CUSHION
SURFACE TREATMENTANODIZE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
SURFACE TREATMENTANODIZE BAND
SPECIAL FEATURESFURNISHED WITH WEDGE
STYLE DESIGNATOROFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END0.811 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1770525?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1770525?
5340PL1770525 is a CLAMP,LOOP.
What parts can replace 5340PL1770525?
There are 29 known substitutes for 5340PL1770525: MILC8603, 99122, MS21919G8 and 26 more. Substitute compatibility should be verified for your specific system.
Is 5340PL1770525 still available?
5340PL1770525 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1770525

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026