PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1362174
5340PL1362174 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER OR PLASTIC CUSHION, overall_width: 0.375 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, surface_treatment: PASSIVATE BAND, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-104-5060, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1362174
NSN: 5340-00-104-5060
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER OR PLASTIC CUSHION
overall_width0.375 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
surface_treatmentPASSIVATE BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.313 INCHES NOMINAL IN
cushioning_environmental_protectionFUEL, AROMATIC
material_document_and_classificationMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.748 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.560 INCHES NOMINAL IN
NSN5340-00-104-5060
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1362174 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER OR PLASTIC CUSHION
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
LOOP INSIDE DIAMETER: 0.313 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.560 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER OR PLASTIC CUSHION
DIAMETER0.204 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE BAND
LOOP INSIDE DIAMETER0.313 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.560 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING BAND
STYLE DESIGNATOROFFSET MOUNT
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.748 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONFUEL, AROMATIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MILC8603Upgraded Successor
successor cross-reference
successor
99122Upgraded Successor
successor cross-reference
successor
MS21919G8Upgraded Successor
successor cross-reference
successor
5096D16Upgraded Successor
successor cross-reference
successor
534002989402Upgraded Successor
successor cross-reference
successor
MS21919G11Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1362174?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1362174?
5340PL1362174 is a CLAMP,LOOP.
What parts can replace 5340PL1362174?
There are 26 known substitutes for 5340PL1362174: MILC8603, 99122, MS21919G8 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5340PL1362174 still available?
5340PL1362174 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1362174

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026