PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340001773872
5340001773872 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL BAND, slot_width: 0.530 INCHES NOMINAL IN, slot_length: 0.750 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: OBLONG. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-177-3872, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340001773872
NSN: 5340-00-177-3872
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL BAND
slot_width0.530 INCHES NOMINAL IN
slot_length0.750 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeOBLONG
surface_treatmentCADMIUM OR ZINC BAND
material_thickness0.045 INCHES NOMINAL IN
loop_inside_diameter0.530 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end3.380 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole2.755 INCHES NOMINAL IN
NSN5340-00-177-3872
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340001773872 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.045 INCHES NOMINAL IN
•
MATERIAL: STEEL BAND
•
SURFACE TREATMENT: CADMIUM OR ZINC BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 3.380 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.045 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL BAND
SURFACE TREATMENTCADMIUM OR ZINC BAND
DISTANCE FROM LOOP CENTER TO TONGUE END3.380 INCHES NOMINAL IN
MATERIALSTEEL BAND
SURFACE TREATMENTCADMIUM OR ZINC BAND
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE BAND
SLOT WIDTH0.530 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
11644886Upgraded Successor
successor cross-reference
successor
5340000085831Upgraded Successor
successor cross-reference
successor
CS-2300-0001Upgraded Successor
successor cross-reference
successor
5340000402185Upgraded Successor
successor cross-reference
successor
213L1Upgraded Successor
successor cross-reference
successor
7346761Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340001773872?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340001773872?
5340001773872 is a CLAMP,LOOP.
What parts can replace 5340001773872?
There are 13 known substitutes for 5340001773872: 11644886, 5340000085831, CS-2300-0001 and 10 more. Substitute compatibility should be verified for your specific system.
Is 5340001773872 still available?
5340001773872 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340001773872

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026