Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include angle: 29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM, color: BLACK OVERALL, width: 2.250 INCHES NOMINAL IN, height: 0.340 INCHES NOMINAL IN, length: 1.062 INCHES NOMINAL IN, cushion: NOT INCLUDED. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-008-5831, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
CS-2300-0001
NSN:5340-00-008-5831 FSC:5340 CAGE:16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
angle
29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM
color
BLACK OVERALL
width
2.250 INCHES NOMINAL IN
height
0.340 INCHES NOMINAL IN
length
1.062 INCHES NOMINAL IN
cushion
NOT INCLUDED
diameter
0.406 INCHES NOMINAL IN
material
STEEL
end_style
SPRING END,SQUARED AND GROUND BOTH ENDS
hole_type
DRILLED
nut_style
ROUND
pin_taper
0.250 PER FOOT IN INCHES
NSN
5340-00-008-5831
COMPONENT DIAGRAM
KEY FEATURES
•
HOLE DIAMETER: 0.180 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.340 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 1.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-417, TYPE R, CLASS RS, GRADE RS610ABC1F2 MIL STD SINGLE MATERIAL RESPONSE
•
STYLE DESIGNATOR: PAN TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.940 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER
0.180 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER
0.340 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER
1.000 INCHES NOMINAL IN
MATERIAL
RUBBER SYNTHETIC
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-STD-417, TYPE R, CLASS RS, GRADE RS610ABC1F2 MIL STD SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR
PAN TOP COUNTERBORED
FIRST COUNTERBORE DEPTH
0.940 INCHES NOMINAL IN
SPECIAL FEATURES
STEEL WASHER IMBEDDED
MATERIAL HARDNESS RATING
55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS-2300-0001?
CS-2300-0001 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace CS-2300-0001?
There are 18 known substitutes for CS-2300-0001: 10896422, CS-2300-0001, 5340000533626 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CS-2300-0001?
CS-2300-0001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-008-5831. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.