PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 213L1
213L1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.406 INCHES NOMINAL IN, material: STEEL COMP 1010 OVERALL, overall_width: 2.500 INCHES NOMINAL IN, style_designator: CENTER MOUNT, material_thickness: 0.1196 INCHES NOMINAL IN, loop_inside_diameter: 7.063 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-040-2185, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
213L1
NSN: 5340-00-040-2185
FSC: 5340
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
diameter0.406 INCHES NOMINAL IN
materialSTEEL COMP 1010 OVERALL
overall_width2.500 INCHES NOMINAL IN
style_designatorCENTER MOUNT
material_thickness0.1196 INCHES NOMINAL IN
loop_inside_diameter7.063 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end5.250 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes1.250 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole4.625 INCHES NOMINAL IN
NSN5340-00-040-2185
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 213L1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 5.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 1.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.1196 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 7.063 INCHES NOMINAL IN
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CENTER MOUNT
TECHNICAL CHARACTERISTICS (FLIS)
DISTANCE FROM LOOP CENTER TO TONGUE END5.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010 OVERALL
OVERALL WIDTH2.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES1.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.1196 INCHES NOMINAL IN
LOOP INSIDE DIAMETER7.063 INCHES NOMINAL IN
DIAMETER0.406 INCHES NOMINAL IN
STYLE DESIGNATORCENTER MOUNT
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE4.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
10896422Upgraded Successor
successor cross-reference
successor
CS-2300-0001Upgraded Successor
successor cross-reference
successor
5340000533626Upgraded Successor
successor cross-reference
successor
8345251Upgraded Successor
successor cross-reference
successor
830L2Upgraded Successor
successor cross-reference
successor
5340000693676Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 213L1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 213L1?
213L1 is a CLAMP,LOOP.
What parts can replace 213L1?
There are 18 known substitutes for 213L1: 10896422, CS-2300-0001, 5340000533626 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 213L1?
213L1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-040-2185. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 213L1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026