PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340000693676
5340000693676 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, slot_width: 0.340 INCHES NOMINAL IN, slot_length: 0.500 INCHES NOMINAL IN, overall_width: 0.620 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.048 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-069-3676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340000693676
NSN: 5340-00-069-3676
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
slot_width0.340 INCHES NOMINAL IN
slot_length0.500 INCHES NOMINAL IN
overall_width0.620 INCHES NOMINAL IN
style_designatorSINGLE LOOP
material_thickness0.048 INCHES NOMINAL IN
loop_inside_diameter0.470 INCHES NOMINAL IN
material_document_and_classificationQQ-S-698 FED SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end1.190 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.820 INCHES NOMINAL IN
NSN5340-00-069-3676
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340000693676 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SLOT LENGTH: 0.500 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.820 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.048 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.190 INCHES NOMINAL IN
•
SLOT WIDTH: 0.340 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-698 FED SPEC ALL MATERIAL RESPONSES BAND
•
LOOP INSIDE DIAMETER: 0.470 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
SLOT LENGTH0.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.820 INCHES NOMINAL IN
MATERIAL THICKNESS0.048 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.190 INCHES NOMINAL IN
SLOT WIDTH0.340 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC ALL MATERIAL RESPONSES BAND
LOOP INSIDE DIAMETER0.470 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALSTEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
OVERALL WIDTH0.620 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
11644886Upgraded Successor
successor cross-reference
successor
5340000085831Upgraded Successor
successor cross-reference
successor
CS-2300-0001Upgraded Successor
successor cross-reference
successor
5340000402185Upgraded Successor
successor cross-reference
successor
213L1Upgraded Successor
successor cross-reference
successor
7346761Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340000693676?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340000693676?
5340000693676 is a CLAMP,LOOP.
What parts can replace 5340000693676?
There are 14 known substitutes for 5340000693676: 11644886, 5340000085831, CS-2300-0001 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340000693676?
5340000693676 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-069-3676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340000693676

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026