PartsTable
Technical Data Sheet
PartsTable / O-RING / 5331PL0937959
5331PL0937959 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 0.629 INCHES NOMINAL IN, center_hole_diameter: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-119-2008, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0937959
NSN: 5331-01-119-2008
FSC: 5331 — O-RING
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
outside_diameter0.629 INCHES NOMINAL IN
center_hole_diameter0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
material_document_and_classificationMIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5331-01-119-2008
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0937959 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 0.629 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
ELONGATION PERCENTAGE125 MAXIMUM
CRITICALITY CODE JUSTIFICATIONZZZW
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER0.629 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
M93248/1-014Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-014Interchangeable
interchangeable cross-reference
interchangeable
9550094Interchangeable
interchangeable cross-reference
interchangeable
AS3209-014Interchangeable
interchangeable cross-reference
interchangeable
SAE-AMS7276Interchangeable
interchangeable cross-reference
interchangeable
000216EBInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5331PL0937959?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0937959?
5331PL0937959 is a O-RING.
What parts can replace 5331PL0937959?
There are 27 known substitutes for 5331PL0937959: M93248/1-014, M83248/1-014, 9550094 and 24 more. Substitute compatibility should be verified for your specific system.
Is 5331PL0937959 still available?
5331PL0937959 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0937959

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026