PartsTable
Technical Data Sheet
SAE-AMS7276 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, special_features: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, end_item_identification: F-15SA, criticality_code_justification: FEAT, material_document_and_classification: AMS 7276 FED SPEC SINGLE MATERIAL RESPONSE, part_name_assigned_by_controlling_agency: PACKING, PREFORMED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-005-0482, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SAE-AMS7276
NSN: 5331-00-005-0482
FSC: 5331 — O-RING
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
special_featuresCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
end_item_identificationF-15SA
criticality_code_justificationFEAT
material_document_and_classificationAMS 7276 FED SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyPACKING, PREFORMED
NSN5331-00-005-0482
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SAE-AMS7276 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER: 5.202 INCHES MINIMUM AND 5.272 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER: 5.402 INCHES MINIMUM AND 5.484 INCHES MAXIMUM IN
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER5.202 INCHES MINIMUM AND 5.272 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER5.402 INCHES MINIMUM AND 5.484 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
V0747 2-160Interchangeable
interchangeable cross-reference
interchangeable
2-160 V747-75Interchangeable
interchangeable cross-reference
interchangeable
AS3085-160Interchangeable
interchangeable cross-reference
interchangeable
AS3209-160Interchangeable
interchangeable cross-reference
interchangeable
6843333-160Interchangeable
Same NIIN cross-reference
interchangeable
AS568-160MIL-R-83248 TYPE 1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy SAE-AMS7276?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SAE-AMS7276?
SAE-AMS7276 is a O-RING.
What parts can replace SAE-AMS7276?
There are 12 known substitutes for SAE-AMS7276: V0747 2-160, 2-160 V747-75, AS3085-160 and 9 more. Substitute compatibility should be verified for your specific system.
Is SAE-AMS7276 still available?
SAE-AMS7276 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SAE-AMS7276