PartsTable
Technical Data Sheet
PartsTable / O-RING / M83248/1-014
M83248/1-014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The M83248/1-014 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-0990, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
M83248/1-014
NSN: 5331-00-166-0990
FSC: 5331 — O-RING
CAGE: 74703 — LOCKHEED MARTIN AERONAUTICAL SYSTEMS SUPPORT COMPANY DBA LMASSC (USA)
SPECIFICATIONS
Part NumberM83248/1-014
NSN5331-00-166-0990
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: M83248/1-014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
D95000-014Interchangeable
interchangeable cross-reference
interchangeable
95000-014Interchangeable
interchangeable cross-reference
interchangeable
AS3209-015Interchangeable
interchangeable cross-reference
interchangeable
J221P015Interchangeable
interchangeable cross-reference
interchangeable
675-00015-0Interchangeable
interchangeable cross-reference
interchangeable
9-253-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy M83248/1-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is M83248/1-014?
M83248/1-014 is a M83248/1-014.
What parts can replace M83248/1-014?
There are 23 known substitutes for M83248/1-014: D95000-014, 95000-014, AS3209-015 and 20 more. Substitute compatibility should be verified for your specific system.
Is M83248/1-014 still available?
M83248/1-014 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — M83248/1-014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026