PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0928827
5330PL0928827 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 0.674 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN, center_hole_diameter: 0.500 INCHES NOMINAL IN, distance_between_ends: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-5047, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0928827
NSN: 5330-00-171-5047
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC TETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT RETAINER
peripheral_diameter0.674 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
center_hole_diameter0.500 INCHES NOMINAL IN
distance_between_ends0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
cross-sectional_height0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
cross-sectional_thickness0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-171-5047
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0928827 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
JOINT TYPE: SCARF-BUTT RETAINER
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PERIPHERAL DIAMETER: 0.674 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
JOINT TYPESCARF-BUTT RETAINER
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL DIAMETER0.674 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
78223PC3Interchangeable
interchangeable cross-reference
interchangeable
SP2910Interchangeable
interchangeable cross-reference
interchangeable
53090PC26Interchangeable
interchangeable cross-reference
interchangeable
MS28782-10Interchangeable
interchangeable cross-reference
interchangeable
81586Interchangeable
interchangeable cross-reference
interchangeable
24211Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0928827?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0928827?
5330PL0928827 is a RETAINER,PACKING.
What parts can replace 5330PL0928827?
There are 13 known substitutes for 5330PL0928827: 78223PC3, SP2910, 53090PC26 and 10 more. Substitute compatibility should be verified for your specific system.
Is 5330PL0928827 still available?
5330PL0928827 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0928827

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026