Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The VALVE,FLOW CONTROL is a the manufacturer industrial component. Key specifications include body_material: STEEL, end_item_identification: 3810011444885. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-5047, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MS28782-10
NSN:5330-00-171-5047 FSC:5330 CAGE:96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_material
STEEL
end_item_identification
3810011444885
NSN
5330-00-171-5047
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
JOINT TYPE: SCARF-BUTT RETAINER
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PERIPHERAL DIAMETER: 0.674 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS
0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
ANGLE
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
JOINT TYPE
SCARF-BUTT RETAINER
CROSS-SECTIONAL HEIGHT
0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS
0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
CENTER HOLE DIAMETER
0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION
SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS28782-10?
MS28782-10 is a VALVE,FLOW CONTROL.
What parts can replace MS28782-10?
There are 14 known substitutes for MS28782-10: 78223PC3, SP2910, 53090PC26 and 11 more. Substitute compatibility should be verified for your specific system.
Is MS28782-10 still available?
MS28782-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.