PartsTable
Technical Data Sheet
PartsTable / COMPONENT / SP2910
SP2910 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 482 OVERALL, head_style: SQUARE EXTENDED WASHER, head_height: 0.375 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.344 INCHES MINIMUM IN, fastener_length: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-5047, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP2910
NSN: 5330-00-171-5047
FSC: 5330
CAGE: 24785 — VICKERS INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY 482 OVERALL
head_styleSQUARE EXTENDED WASHER
head_height0.375 INCHES NOMINAL IN
thread_class3A A
thread_length0.344 INCHES MINIMUM IN
fastener_length0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedFINISHED HEAD
width_between_flats0.214 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
extended_washer_diameter0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
thread_quantity_per_inch20
NSN5330-00-171-5047
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP2910 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
JOINT TYPE: SCARF-BUTT RETAINER
•
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PERIPHERAL DIAMETER: 0.674 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
JOINT TYPESCARF-BUTT RETAINER
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS0.032 INCHES MINIMUM AND 0.078 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL DIAMETER0.674 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
78223PC3Interchangeable
interchangeable cross-reference
interchangeable
SP2910Interchangeable
interchangeable cross-reference
interchangeable
53090PC26Interchangeable
interchangeable cross-reference
interchangeable
MS28782-10Interchangeable
interchangeable cross-reference
interchangeable
81586Interchangeable
interchangeable cross-reference
interchangeable
24211Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP2910?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP2910?
SP2910 is a BOLT,MACHINE.
What parts can replace SP2910?
There are 14 known substitutes for SP2910: 78223PC3, SP2910, 53090PC26 and 11 more. Substitute compatibility should be verified for your specific system.
Is SP2910 still available?
SP2910 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP2910

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026