PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5310000609031
5310000609031 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, length: 0.400 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.450 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-060-9031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5310000609031
NSN: 5340-00-060-9031
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
length0.400 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.450 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.375 INCHES NOMINAL IN
distance_from_loop_center_to_end0.250 INCHES NOMINAL IN
material_document_and_classificationASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-060-9031
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5310000609031 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 0.375 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING DIMENSION0.375 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
OVERALL HEIGHT0.450 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
MATERIALSTEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.093 INCHES NOMINAL IN
LENGTH0.400 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
6008-46C012Interchangeable
interchangeable cross-reference
interchangeable
MS28136-101Interchangeable
interchangeable cross-reference
interchangeable
MS28136Interchangeable
interchangeable cross-reference
interchangeable
MS28136-106Interchangeable
interchangeable cross-reference
interchangeable
5999007236902Interchangeable
interchangeable cross-reference
interchangeable
6008-46AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5310000609031?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5310000609031?
5310000609031 is a CLIP,SPRING TENSION.
What parts can replace 5310000609031?
There are 12 known substitutes for 5310000609031: 6008-46C012, MS28136-101, MS28136 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5310000609031?
5310000609031 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-060-9031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5310000609031

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026