The Screw,machine, cataloged under National Stock Number 5305-01-020-5921, is classified within Federal Supply Class 5305 (No Item Name Available) of the Hardware and Abrasives group. The primary manufacturer of record is National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use. Government technical data includes 21 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-020-5921 |
| Primary Part Number | MS35275-204 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — No Item Name Available |
| Manufacturer | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use |
| Status | ACTIVE |
| Head Diameter | 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 5616 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Class | 2A A |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Internal Drive Style | SLOT |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Hole Quantity | 1 |
| Thread Quantity Per Inch | 56 |
| Screw Surface Treatment Document and Classification | MIL-C-13924,CL 4 MIL SPEC SINGLE TREATMENT RESPONSE |
| Departure From Cited Document | AS MODIFIED BY SURFACE TREATMENT |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Height | 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Screw Material | STEEL CORROSION RESISTING |
| Thread Length | 0.245 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Head Hole Configuration Style | HEXAGON FLATS |
| Screw Surface Treatment | OXIDE |
| Hole Diameter | 0.031 INCHES NOMINAL IN |
| Nondefinitive Spec/std Data | 1 TYPE AND 5S STYLE |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MS35275-204 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MS35275-204 PRIMARY | National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use (USA) |
| 120354-004 PRIMARY | Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems (USA) |
| FF-S-92 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
NSN 5305-01-020-5921 is a Screw,machine, manufactured by National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use, classified under FSC 5305 (No Item Name Available). Status: active.
NSN 5305-01-020-5921 has 4 cross-referenced part numbers: MS35275-204 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MS35275-204 (National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use), 120354-004 (Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems), FF-S-92 (Federal Specifications Promulgated by General Services Administration Washington DC).
There is 1 known substitute for 5305-01-020-5921: 5305-00-948-4042. Verify interchangeability with system specifications before substitution.
Key specifications for MS35275-204: Head Diameter: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS 5616 FED SPEC SINGLE MATERIAL RESPONSE; Thread Class: 2A A; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. 21 total characteristics are documented in the Federal Logistics Information System.