PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-92
FF-S-92 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

SOCKET,PLUG-IN ELECTRONIC COMPON. Key specifications include head_style: ROUND, head_height: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MAXIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-001-7628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-92
NSN: 5305-00-001-7628
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleROUND
head_height0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
thread_length0.500 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
NSN5305-00-001-7628
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-92 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 60000 POUNDS PER SQUARE INCH LBS
•
THREAD QUANTITY PER INCH: 32
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
THREAD LENGTH: 1.000 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD CLASS: 2A A
•
HEAD HEIGHT: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH1.000 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
THREAD QUANTITY PER INCH32
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD LENGTH1.000 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
HEAD HEIGHT0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
MS24693-96Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-92?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-92?
FF-S-92 is a SOCKET,PLUG-IN ELECTRONIC COMPON.
What parts can replace FF-S-92?
There is 1 known substitute for FF-S-92: MS24693-96. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-92?
FF-S-92 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-001-7628. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-92

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026