PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 120354-004
120354-004 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, hole_diameter: 0.031 INCHES NOMINAL IN, thread_length: 0.245 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-020-5921, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
120354-004
NSN: 5305-01-020-5921
FSC: 5305
CAGE: 81413 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. DBA BAE SYSTEMS (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.055 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
hole_diameter0.031 INCHES NOMINAL IN
hole_quantity1
thread_length0.245 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.086 INCHES IN
NSN5305-01-020-5921
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 120354-004 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5616 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD CLASS: 2A A
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5616 FED SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS2A A
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
INTERNAL DRIVE STYLESLOT
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
HOLE QUANTITY1
THREAD QUANTITY PER INCH56
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
6403Interchangeable
interchangeable cross-reference
interchangeable
0457-64Interchangeable
interchangeable cross-reference
interchangeable
177004-11Interchangeable
interchangeable cross-reference
interchangeable
MS35275-204Interchangeable
Same NIIN cross-reference
interchangeable
FF-S-92Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 120354-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 120354-004?
120354-004 is a SCREW,MACHINE.
What parts can replace 120354-004?
There are 5 known substitutes for 120354-004: 6403, 0457-64, 177004-11 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 120354-004?
120354-004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-020-5921. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 120354-004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026