PartsTable
Technical Data Sheet
4871-02 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include end_item_identification: CONTROL PANEL LOW PRESSURE AIR, part_name_assigned_by_controlling_agency: GAGE,PRESS-OUTLET. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-2494, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4871-02
NSN: 5340-00-286-2494
FSC: 5340
CAGE: 57733 — STEWART-WARNER CORPORATION (USA)
SPECIFICATIONS
end_item_identificationCONTROL PANEL LOW PRESSURE AIR
part_name_assigned_by_controlling_agencyGAGE,PRESS-OUTLET
NSN5340-00-286-2494
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4871-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LOOP INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
SURFACE TREATMENT: CADMIUM OR ZINC OR CHROMATE BAND
MATERIAL: STEEL BAND
MATERIAL DOCUMENT AND CLASSIFICATION: AISI C1005 THRU C1020 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.562 INCHES NOMINAL IN
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.812 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.375 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OR CHROMATE BAND
MATERIALSTEEL BAND
MATERIAL DOCUMENT AND CLASSIFICATIONAISI C1005 THRU C1020 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.562 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.812 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.281 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
MS21333-27Upgraded Successor
successor cross-reference
successor
NASM21333Upgraded Successor
successor cross-reference
successor
MS21333-10Upgraded Successor
successor cross-reference
successor
NASM21333-10Upgraded Successor
successor cross-reference
successor
105-247Upgraded Successor
successor cross-reference
successor
8RG3029Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4871-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4871-02?
4871-02 is a CLAMP,LOOP.
What parts can replace 4871-02?
There are 30 known substitutes for 4871-02: MS21333-27, NASM21333, MS21333-10 and 27 more. Substitute compatibility should be verified for your specific system.
Is 4871-02 still available?
4871-02 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4871-02