The Hose Assembly,nonmetallic, cataloged under National Stock Number 4720-01-474-3486, is classified within Federal Supply Class 4720 (No Item Name Available) of the Pipe, Tubing, Hose, and Fittings group. The primary manufacturer of record is Delafield Corp Dba Delafield Fluid Technologies. Government technical data includes 23 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 10 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4720-01-474-3486 |
| Primary Part Number | D3081 |
| Item Name | Hose Assembly,nonmetallic |
| FSC / FSG | 4720 / 47 — No Item Name Available |
| Manufacturer | Delafield Corp Dba Delafield Fluid Technologies |
| Status | ACTIVE |
| Minimum Inside Bending Radius | 2.500 INCHES IN |
| Layer Composition and Location | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| Connection Style | SWIVEL NUT FLARE FIRST END |
| Inside Diameter | 0.375 INCHES NOMINAL IN |
| Thread Direction | RIGHT-HAND FIRST END |
| End Fitting Component and Material | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| End Connection Design | STRAIGHT FIRST END |
| End Connection Design | STRAIGHT SECOND END |
| Connection Type | THREADED INTERNAL TUBE FIRST END |
| Outside Diameter | 0.500 INCHES NOMINAL IN |
| Thread Class | 2B FIRST END |
| Temp Rating | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF |
| Fitting Component and Surface Treatment | COMPLETE FITTING PASSIVATE FIRST END |
| Specification/standard Data | SAEJ514-81343 NATIONAL STD/SPEC |
| Seat Angle | 12.0 DEGREES FIRST END |
| Operating Pressure | 100.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| Inside Surface Condition | SMOOTH |
| Measuring Method and Length | 27.800 INCHES NOMINAL WORKING IN |
| Nominal Thread Size | 0.5625 INCHES FIRST END IN |
| Hydrostatic Test Pressure | 200.0 POUNDS PER SQUARE INCH LBS |
| Cross-Sectional Shape Style | ROUND |
| Media for Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| PL405550-01-01 | Bae Systems Controls Inc. (USA) |
| 405752 | Bae Systems Controls Inc. (USA) |
| D3081 PRIMARY | Delafield Corp Dba Delafield Fluid Technologies (USA) |
| 405752-01 | Bae Systems Controls Inc. (USA) |
| PL405550-01-01 FN 193 | Bae Systems Controls Inc. (USA) |
NSN 4720-01-474-3486 is a Hose Assembly,nonmetallic, manufactured by Delafield Corp Dba Delafield Fluid Technologies, classified under FSC 4720 (No Item Name Available). Status: active.
NSN 4720-01-474-3486 has 5 cross-referenced part numbers: PL405550-01-01 (Bae Systems Controls Inc.), 405752 (Bae Systems Controls Inc.), D3081 (Delafield Corp Dba Delafield Fluid Technologies), 405752-01 (Bae Systems Controls Inc.), PL405550-01-01 FN 193 (Bae Systems Controls Inc.).
There are 10 known substitutes for 4720-01-474-3486: 5930-00-078-5961, 5930-00-622-4063, 2835-00-946-2576 and 7 more. Verify interchangeability with system specifications before substitution.
Key specifications for D3081: Minimum Inside Bending Radius: 2.500 INCHES IN; Layer Composition and Location: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE; Connection Style: SWIVEL NUT FLARE FIRST END; Inside Diameter: 0.375 INCHES NOMINAL IN. 24 total characteristics are documented in the Federal Logistics Information System.